3Com OfficeConnect Remote 812 manual IP setup is completed, Quick Setup IPX Information

CLI Quick Setup Script 4-5

The OCR 812 can act as a DHCP server, providing IP addresses to other stations on the local LAN.

Question	Default	Your System
Do you want the OfficeConnect Remote 812 to act	[yes]
as a DHCP server?
Enter the start address for the DHCP IP address	[ ]
pool:
Enter the end address for the DHCP IP address	[ ]
pool:

It is possible to restrict access to the TFTP server to a specific system or a list of systems. Quick Setup will allow you to enter one system that is allowed or allow access to all systems.

Question	Default	Your System
Do you want to allow all systems to access the TFTP	[yes]
server?

IP setup is completed.

Quick Setup IPX Information

The network name is used by the OCR 812 to identify your IPX network.

Question	Default	Your System
Enter the name of your network:	[ipx]

The network number is a non-zero hexadecimal number of up to 8 digits.

Question	Default	System
Enter the ipx network number:	[ ]

You need to specify the framing for the IPX network. It should be one of the following: “ethernet_ii”, “snap”, “dsap”, “novell_8023.”

Question	Default	System
What is the framing for the IPX network ?	[ethernet_ii]