Operation
Rotisserie Setup (if equipped)
NOTICE
Figure 12a | Rotisserie Motor Bracket |
|
The rotisserie assembly includes a counterweight for large or irregular foods; using the counterweight reduces strain on the motor which is rated to turn a maximum of 12 lbs.
1. Attach the Rotisserie Motor Bracket to the left side of the base by aligning the holes and securing the pieces together using the two (2) bolts and two (2) lock nuts provided. (Fig. 12a)
NOTE: For grill models with a marinating station: Loosen the two (2) |
|
| |
bolts and nuts securing the heat shield marinating tray to the grill |
| B163 | |
body. (Fig. 12b) Attach the rotisserie motor bracket using the | Figure 12b | Remove Bolts | |
same mounting holes. Secure both the bracket and heat shield us- | |||
| and Nuts | ||
ing bolts and nuts provided. |
|
|
2. Remove the warming rack. Lay a flat noncombustible pan directly on the cooking grates to catch drippings. Large food items may require that you remove the middle cooking grate(s), and place the pan on the sear plates. Never use the main burners while using the rotisserie burner.
3. | Insert the ends of the Rotisserie Support into the slots of the right |
| ||
| cooking grate, so the edge of the support is approximately 1” from the | B183 | ||
| right casting, and the top groove is in line with the rotisserie spit hole | View from behind | ||
| in the left casting. (Fig. 12c) |
|
| |
4. |
|
| and under the side | |
Engage the Motor Bracket to the left side of the base as per Rotisserie | shelf. | |||
|
|
|
| |
| instructions. |
|
| Heat Shield |
| Rotisserie |
|
| |
5. | Engage the Rotisserie Motor in the | Figure 12c |
| |
Forks |
| |||
| Motor Bracket. (Fig. 12c) |
|
| |
|
|
|
| |
6. | Assemble the spit and meat forks. |
|
|
|
| Adjust the retainer bushing to keep the |
|
| Bushing |
| spit in place. (Fig. 12c) | Rotisserie |
| Rotisserie |
7. | Tighten the thumbscrews with small |
| Support | |
Motor |
| |||
|
| |||
| pliers. |
|
|
|
8. | Insert the Spit Rod into the Rotisserie |
|
|
|
| Motor. (Fig. 12d) |
|
|
|
Motor
Bracket
Figure 12d
B131
Spit Rod - Motor End
B132
Page 10
50004425
