3Com OfficeConnect Remote 812 show snmp counters Displays many SNMP statistics, Input Counters

SNMP User Access - ENABLED (default) or DISABLED Administration by Remote User - ON or OFF

Inbound Connections Authenticate PAP or CHAP - Choices are: CHAP, PAP, EITHER or NONE. PAP is the default

Remote To Local Compression Protocol - authentication protocol used by the remote PPP entity when it authenticated the itself to the local PPP entity, PAP is the default

Local To Remote Compression Protocol - authentication protocol used by the local PPP entity when it authenticated the itself to the remote PPP entity, PAP is the default

Operational Status - not opened or opened

Remote To Local ACC Compression - Indicates whether the remote PPP entity will use Address and Control Compression when sending packets to the local PPP entity. Default: ENABLED.

CLI Commands B-53

SETTINGS￿ for PPP LINK 1 - 5 AUTHENTICATION

￿

show ppp settings Displays￿global settings for PPP. You can modify inbound authentication using the set ppp receive_authentication command.

show security_option Displays￿status for SNMP User Access and Administration by Remote Users. You settings can modify the SNMP User Access using the enable or disable security_option

snmp commands. You can modify Administration by Remote User using the enable or disable security_option remote_user commands.

￿

show snmp counters Displays many SNMP statistics.

INPUT COUNTERS

Packets - number of SNMP packets received

Bad Versions - SNMP messages for an unsupported SNMP version

Bad Community Names - SNMP messages which used an unknown SNMP community name

Bad Community Uses - SNMP messages which represented an SNMP operation not allowed by the SNMP community named in the message

ASN.1 Parse Errors - sum of ASN.1 or BER errors

Too Big Errors - SNMP PDUs for which the value of the error-status field is tooBig'

No Such Name Errors - SNMP PDUs where error-status field is `noSuchName'

Bad Value Errors - SNMP PDUs where error-status field is `badValue'

Read Only Errors - SNMP PDUs where the error-status field is `readOnly'

General Errors - SNMP PDUs where the error-status field is `genErr'

￿Total Request MIB Objects - sum of MIB objects retrieved successfully as the result of receiving valid SNMP Get-Request and Get-Next PDUs