AT&T Remote Port Security Device user manual B - Block User, U - Unblock User, b userid RETURN

B - Block User

Syntax:

b <user_id> [ RETURN ]

Blocks an RPSD Key user from access to the RMATS channel. Both permanent and non-permanent users may be blocked. In the syntax line above, b is the command and <user_id> is the user ID. To determine whether a user is already blocked, or to check the user IDs, use the List User Table command. See List User Table in this section.

Sample Command and Response:

> b KEY20

JPLock01 445 08/12/90 13:14:22 KEY20 -- User Blocked OK --

>

U - Unblock User

Syntax:

u <user_id> [ RETURN ]

Removes the block placed on an RPSD Key user’s access to the RPSD Lock. Both permanent and non-permanent users may be unblocked. In the syntax line above, u is the command and <user_id> is the user ID. To determine whether a user is blocked, or to check the user IDs, use the List User Table command. See List User Table in this section.

Sample Command and Response:

> u KEY20

JPLock01 446 08/12/90 13:19:22 KEY20 -- User Unblocked OK --

>

RPSD System Administrator Command Set 3-9