AT&T Remote Port Security Device user manual LS - List Statistics

LS - List Statistics

Syntax:

ls [ RETURN ]

The List Statistics command displays a statistical summary of call attempts and failures, both cumulative and since the last time the statistical summary was reset. The summary is reset by the administrator using the Reset Statistics command, described in this section.

Sample Command and Response:

> ls

---RPSD/Lock Access Attempt Statistics - Last Reset: 08/14/90

							Since Last Reset	Cumulative
Successful Authentications							19	142
Failed Attempts by Reason							1	1
(1)	No	RPSD/Key				Detected
							0	0
(2)	No	Response
							0	0
(3)	Invalid			User		ID
							1	2
(4)	Blocked			User
							1	1
(5)	Invalid			Response
							3	14
(6)	Outgoing				Call
							1	1
(7)	Ring		-	No	Answer
							2	3
(8)	Force		Disconnect
							2	1
(9)	Restricted Time

The fields of the List Statistics screen are:

Last Reset

Successful Authentications

Failed Attempts by Reason

Gives the date that the statistics kept in the Since Last Reset field were reset to 0. Cumulative statistics are never reset to 0.

Provides the number of times that a caller was successfully authenticated by the Lock since the last time the statistics were reset and also cumulatively since the Lock was installed.

Provides the number of times that a caller failed in an access attempt for each of the nine failure reasons. The statistics are broken down into the number of failures since the last reset and also the cumulative total since the Lock was installed. For a more detailed explanation of the causes of failure, see Table 3-1.

RPSD System Administrator Command Set 3-23