AT&T Remote Port Security Device user manual LR - List Restrictions, lr restrid RETURN

LR - List Restrictions

S y n t a x :

lr [ RETURN ]

or

lr <restr_id> [ RETURN ]

The List Restrictions command is used to list the time restrictions that have been administered. Up to 14 separate restrictions maybe created (A-N).

The first syntax example above will list the time restrictions for all restriction IDs A to N. In the second example, entering a letter for the specific restriction ID will yield the time restrictions for that restriction ID only.

Sample Command and Response:

> lr
Restriction ID	Start Time	End Time	Days	of the Week
A	18:00	24:00	Sat,	Sun
B	12:00	15:00	Sat,	Sun
C	16:00	20:00	Mon
D	01:00	08:00	Mon, Tues, Wed, Thu, Fri
E	00:00	09:00	Thu
-- End of List	--

>

The fields of the List Restrictions screen are:

Restriction ID	The letter code from A to N to be used to assign a restriction or set of
	restrictions to a user or users. To assign restrictions, see the
	User Restrictions command in this section.
Start Time	The time of day, in 24 hour clock format, when the restriction begins.
End Time	The time of day, in 24 hour clock format, when the restriction ends.

Days of the Week The days on which the restricted times take effect.

3-16RPSD System Administration