3Com OfficeConnect Remote 812 manual Type servicetype, Vcname

CLI Commands B-11

delete dns host Deletes the specified host from the DNS Local Host Table. Use list DNS hosts to <host_name> view the DNS Local Host table. After deletion, requests for that host will be

processed through a DNS server, instead of locally. Use list DNS servers to see which servers are defined.

delete dns server Removes the name server addresses associated with the specified domain from the <domain_name> Domain Name Server Table.

delete filter Removes the named filter from the filter table, and deletes the file stored in FLASH <filter_name> memory. Use list filters to see what filter files are in FLASH memory.

delete file <file_name> Deletes a file from the FLASH file system. Use list files to see which files are currently stored.

delete framed route vc Deletes a framed route from the virtual channel profile.

delete ip network Deletes an IP network from the interface that you specified when adding the <network_name> network. Use list ip networks to see which networks are associated with which

interfaces. Always use disable ip network before deleting it.

delete ip route Deletes an IP address from the IP routing table, that you previously added with add <ip_address> ip route. Deleting this route will cause IP packets destined for this network to use

the default route, which you can see using list ip routes. See add defaultroute gateway to find out how to add a default route.

delete ipx network Deletes an IPX network on the interface you specified with the add ipx network <name> command. You can list ipx networks to see which are available, and the network’s

status. Be sure to use the disable ipx network command before deleting the network.

delete ipx route <ipx_net_address>

delete ipx service <service_name>

Deletes an IPX route on the interface you specified with the add ipx route command. The list ipx routes command displays the current IPX routes.

type [service_type]

￿Deletes a static IPX service from the IPX services table. This command will work only if a complete match on all parameters is found. Refer to add ipx service command for more information.

Parameter	Description
service name	Designation of IPX service.
type	Type of service: file/server, print, etc.

delete pat tcp vc	public_port [number]
<vc_name>	￿
delete pat udp vc	public_port [number]
<vc_name>