![](/images/new-backgrounds/1151248/15124841x1.webp)
. A complete Parts List is available |
| |
|
| |
|
| |
| 60 Hz | |
| Single | |
| Phase | |
|
| |
Input Voltage | 230 | |
|
| |
Input Amperes At Rated Output | 21.7 | |
|
| |
Max Recommended Standard Fuse Rating In Amperes |
| |
Circuit Breaker 1, | 25 | |
Normal Operating 3 | 30 | |
Min Input Conductor Size In AWG 4 | 14 | |
Max Recommended Input Conductor Length In Feet (Meters) | 61 | |
(19) | ||
| ||
|
| |
Min Grounding Conductor Size In AWG 4 | 14 |
Reference: 2005 National Electrical Code (NEC) (including article 630)
1Choose a circuit breaker with
2
3“Normal Operating” (general purpose - no intentional delay) fuses are UL class “K5” (up to and including 60 amp), and UL class “H” ( 65 amp and above).
4Conductor data in this section specifies conductor size (excluding flexible cord or cable) between the panelboard and the equipment per NEC Table 310.16. If a flexible cord or cable is used, minimum conductor size may increase. See NEC Table 400.5(A) for flexible cord and cable requirements.
YCaution: Failure to follow these fuse and circuit breaker recommendations could create an electric shock or fire hazard. These recommendations are for a dedicated branch circuit that applies to the rated output and duty cycle of the welding power source.
4-10. Installing Wire Spool And Adjusting Hub Tension
Installing 4 in (102 mm) Wire Spool
When a slight force is needed to turn spool, tension is set.
Installing 8 in (203 mm) Wire Spool
Adapter used with
8 in (203 mm)
spool only.
When a slight force is needed to turn spool, tension is set.
Retaining ring used with 8 in (203 mm)
spool only.
Tools Needed:
1/2 in
803 012 / 803 013