.A complete Parts List is available on-line at www.MillerWelds.com

SECTION 5 − OPERATION

5-1. Controls For 115 VAC Model w/Auto-SetE

1

6

2

3

54

227 748-C

1 Wire Speed Control

Turn control clockwise inside white scale (10-100) to increase wire feed speed. (see weld parameter chart in welding power source or Section 5-4,5-5,5-6,5-7,or 5-8as applicable).

2 Voltage Control

Turn control clockwise inside white scale (1-10) to increase voltage (see weld parameter chart in welding power source or Section 5-4,5-5,5-6, ,5-7,or 5-8as applicable).

3Power Switch

4Over Temperature Light

5Gun Trigger Receptacle

6Auto−SetLight

To use Auto−Setmode, rotate Wire Speed control inside blue area for the applicable Weld Wire Diameter, Auto−Setlight will turn on, and the unit will

provide the appropriate wire feed speed for the material thickness selected using the Voltage control (see Section 5-4).

Rotate Voltage control inside blue scale (24 ga to 1/8”) for the applicable material thickness and the unit will provide the appropriate voltage within the range of the selected material thickness and the selected Weld Wire Diameter (see Section 5-4).

OM-225 311 Page 22

Page 26
Image 26
Miller Electric 180, M-10 Gun, 140 Auto-Set manual Operation, Controls For 115 VAC Model w/Auto-SetE