Miller Electric M-10 Gun, 180, 140 Auto-Set manual #220179 #202926

.A complete Parts List is available on-line at www.MillerWelds.com

NOTE: Settings are approximate. Adjust as required. “−−−” Means not recommended.

Thicker materials can be welded using proper technique, joint preparation and multiple passes.

IMPORTANT: Match drive roll groove to diameter of wire being used. Set Tension knob setting to 3 at start. Adjust tension per instructions in the manual.

1.5/20	2/25	2/25		2.5/30		3/45	3.5/60	4/70	6/100
1.5/15	2/20	2/20		2.5/30		3/35	3.5/40	4.5/55	6/75	6/80	10/95
	2/12	2/15		2.5/20		3/25	3.5/30	4.5/45	6/55	6.5/60	10/70
		3.5/25		3.5/25		4/40	4.5/50	5/60	7/85
		3/15		3.5/20		4/25	4.5/35	5.5/45	6/55	6.5/65	10/75
				3/12		4/20	4.5/30	5.5/35	6/40	6.5/50	10/55
				1/15		2/20	3.5/35	4/45	6/65	6.5/75
				1/10		2/15	3/25	4/35	6/55	7/60	10/65
					2.5/10		3/15	4/25	6/35	7/40	10/45
		3.5/30		3.5/45		4/50	4.5/70	5/80	6/95
		3.5/25		3.5/28		4/45	5/60	5/70	6/85	7.5/95
				2.5/20	3.5/25		4/40	4.5/50	6/65	7.5/80
with optional Spool Gun, Order part no. 300371
				2/70		2/70	4/70	5/70	8/95	10/100
					2.5/65		4/60	5/65	8/90	10/90
			.024” (0.6 mm)			#220179
			.030” (0.8 mm)			#220179		#202926
			.035” (0.9 mm)			#220179		#202926
			.045” (1.2 mm)					#202926

225 229−F

225 229-F

OM-225 311 Page 33