3Com OfficeConnect Remote 812 manual Show ipx sap Settings Counters

B-50APPENDIX B: CLI COMMAND DESCRIPTION

	Parameter		Description
	settings		Displays the state of the IPX routing. This is ON or OFF.
	counters		Displays the Incorrect RIP Packets for the IPX routing. The incorrect RIP
			packets are the number of RIP packets that do not make sense.
show ipx sap		settings
	￿	counters

Displays information about SAP for IPX.

Parameter	Description
settings	Displays the state of the IPX routing. This is ON or OFF.
counters	Displays the Incorrect SAP Packets for the IPX routing. The incorrect SAP
	packets are the number of SAP packets that do not make sense.

show ipx settings Displays settings for dynamic IPX networks. You can modify these values using the set ipx system command.

Default Gateway - default IPX router address

Max Open Sockets - maximum allowed number of open sockets to remote IPX networks

Max Hops - maximum allowed hops to remote IPX networks.

Priority - preferred ranking of dynamic IPX networks

Dynamic Address Pool Begin - starting IPX address

￿Dynamic Address Pool Size - number of addresses to reserve for dynamic IPX address assignments

show memory Displays System DRAM Memory usage.

Total System Memory Resources - total amount of memory in system

Free Memory - amount of memory not in use

Code Size - amount of memory used by code

￿Initialized Data Size, Uninitialized Data Size, Stack Size - static data areas

show network <name> Displays the configured settings for the specified network. The display varies settings depending on the type of network specified. Some of the settings displayed are

Interfaces, Network Address, Frame Type, Status, User Name, and Spawning Tree Enabled.

show network <name> Displays the statistical counters for the specified network. The display varies counters depending on the type of network specified. Some of the counters are Received

Frames, Transmitted Frames, and Discarded Frames.