D-Link DCS-900W manual Tools Default, Status, Factory Reset

DCS-900W Configuration (continued)

Tools > Default

The Default tab contains commands for restarting the DCS-900W.

Click on Tools, then the Default tab in the left hand panel and the Tools screen will appear as illustrated below

Factory Reset:

A factory reset restarts the DCS-900W and returns all settings to their default values. The Factory Reset will promt you with a “Do you really want to factory reset this device?” message and a YES button. If you do not want to carry out a factory reset command, exit the panel without clicking YES, otherwise click on the “YES” icon and factory reset will be initiated.

Warning

All settings must be reconfigured after a Factory Reset!

Status

The Status menu displays information about your DCS-900W.

Click on Status and the Information screen will appear as illustrated below:

The Information table provides detailed information about the DCS-900W such as the Model Name, Firmware Version, Mac Address, and IP Address.

38