D-Link DCS-900W manual Hardware Installation, Attach the Antenna

Models: DCS-900W

1 98
Download 98 pages 25.68 Kb
Page 9
Image 9

Hardware Installation

Attach the Antenna

Locate the antenna included with your DCS-900W and attach it to the antenna connector located on the back of the DCS-900W.

Attach the Swivel Stand

Locate the stand mount on the bottom of the DCS- 900W and screw on the swivel stand.

Connect the Ethernet Cable

Connect the included Ethernet cable to the network cable connector located on the back panel of the DCS-900W and attach it to the network.

Attach the External Power Supply

Attach the external power supply to the DC power input connector located on the rear panel of the DCS-900W and connect it to your local power supply. Note: Power source is confirmed when the green LED Power Indicator located to the right of the lens on the DCS-900W is illuminated.

Network Connectivity is confirmed when the orange LED Indicator on the DCS-900W located below the Power LED is illuminated.

9

Page 9
Image 9
D-Link DCS-900W manual Hardware Installation, Attach the Antenna