3Com OfficeConnect Remote 812 manual Gateway gatewayaddr Metric hopcount, Address

B-4APPENDIX B: CLI COMMAND DESCRIPTION

add ip network <network_name>

address [ip_net_address]

frame [ETHERNET_II SNAP LOOPBACK]

{ interface [eth:1] }

￿{ enabled [yes] }

Adds an IP network to the list of IP networks available over the specified interface.

Parameter	Description
<network_name>	Name of IP network, consisting of up to 32 unique ASCII characters; space
	must be surrounded by double quotes.
address	IP address of the network, in the format nnn.nnn.nnn.nnn, with or without
	a mask specifier. The Mask Specifier can be ‘A’, ‘B’, ‘C’, or ‘H’, or a numeric
	value from 8 to 30 that describes the number of one bits in the mask. If you
	do not specify a mask, the system will generate it for you from the network
	address.
frame	Frame encapsulation to be used on this IP network. The options are:
	ETHERNET_II, LOOPBACK (for diagnostics), or SNAP.
interface	Name of the interface which this IP network will communicate over. The
	default is the first LAN interface (eth:1).
enabled	This optional parameter indicates whether the network is enabled (YES) or
	disabled (NO). YES is the default.

add ip route <ip_net_address>

gateway [gateway_addr]

￿metric [hop_count]

Adds an entry to the IP routing table. IP packets destined for networks that match this network will be routed to this address. The command list ip routes displays your currently defined routes.

Parameter	Description
<net_address>	IP address of the remote network, in the format nnn.nnn.nnn.nnn, with or
	without a mask specifier. The Mask Specifier can be ‘A’, ‘B’, ‘C’, or ‘H’, or a
	numeric value from 8 to 30 that describes the number of one bits in the mask.
	If you do not specify a mask, the system will generate it from the network
	address.
gateway	IP address of gateway used to reach this remote network.
metric	An integer representing how far away the route is, in “hops” through other
	routers. Values are 1-15.

add ipx network <network_name>

address [ipx_address]

{interface [eth:1] }

{enabled [yes] }

￿frame [ETHERNET_II SNAP DSAP NOVELL_8023]

Adds an IPX network to the list of IPX networks available over the specified interface.

Parameter	Description
<network_name>	Name of IPX network. A unique ASCII string of up to 32 characters; space
	must be surrounded by double quotes.