3Com OfficeConnect Remote 812 manual Configuring IPX Static and Framed Routes

delete ipx_route vc <vc name> ipx_route <ipx network address

To delete a framed route so that it no longer will be installed in the routing table when the connection is established use the command:

To delete an IPX static route, use the command:

If you wish to set up a route to a network on the other side of a remote site, use a framed route.

If you wish to set up a route to a network through the LAN, use a static route. Only use static and framed routes for networks not learned using RIP.

To add a static IPX route over the LAN, use the command:

￿A static route is a configured route that will remain in the routing table until deleted. Static routes differ from Dynamic routes in that Dynamic routes are learned real-time via RIP or when new connections are established.

A framed route is much like a static route in that you manually configure the route. The difference is that a static route is defined for the LAN while a framed route is associated with a remote site connection. Also, while a static route is active when the LAN is connected, a framed route is active only when the connection to the associated remote site is active.

To specify that the interface is Unnumbered you must enter 00000000 for the <ipx network address> parameter.

add ipx route <ipx network address> gateway <ipx network address> metric <number>

ticks <number>

set vc <vc name> ipx_address 00000000

IPX Routing 6-33

Configuring IPX Static

and Framed Routes

￿The route will appear in the IPX routing table.

You can display all IPX routes with the list ipx routes command.

￿delete ipx route <ipx network address>

To add a framed route that will be installed in the IPX routing table when a connection is established use the following command:

add ipx_route vc <vc name> ipx_net <ipx network address> metric <number>

ticks <number>

The route will be removed from the IPX routing table when the VC profile is disabled.

￿Remember to disable and then re-enable the VC profile for the change to take effect.