3Com OfficeConnect Remote 812 manual trapcommunities not list access

CLI Commands B-21

Type - STATIC or DYNAMIC network ￿Network Address - address of the network

list processes Displays all processes running on the system.

Index - a reference number in the process table

Name - designation of the process (e.g.: Domain Name System)

Type - SYSTEM, APPLICATION, FORWARDER or DRIVER

￿Status - ACTIVE, PENDING or INACTIVE

list ppp Displays PPP bundles and links. When multiple physical links are combined to run multilink PPP (RFC1717), the group of physical links is called a bundle. With the OCR 812, only a single link is supported.

This command displays:

Bundle Index - index number of the physical interface in the bundle

Link Index - index number in the list of links

Oper Status - current operational status of the link ￿Interface Name - designation of interface belonging to this bundle

list services Displays all network services you defined using the add network service command: Name - name of service

Server Type - type of service. For example: tftp

Socket - TCP port number used by the service

Close - reveals whether all connections close when you disable this service: ￿TRUE or FALSE. See add network service command for details.

Admin Status - the status you have requested for this service: ENABLED or

DISABLED. See the add network service command for details.

list snmp communities These commands display the defined SNMP communities, which you previously or list snmp defined using the add snmp community command. SNMP trap_communities does

trap_communities not list access.

Community Name - community designation for the IP address

IP address - IP address of a member of the community

￿Access (Read/Write) - type of access a member has to MIBs

list syslog Displays IP addresses which get syslog entries from the system. See add syslog for more information, and delete syslog command to remove entries. This command shows:

Syslog - IP address to which syslog entries will be sent

Log Level - reporting level of entries to send

￿Msg Count - current number of messages sent since system bootup Also see list facilities and set facilities commands, which let you view and change log reporting levels for each system facility.