3Com OfficeConnect Remote 812 manual set interface interfacename, routingprotocol NONE RIPV1 RIPV2

CLI Commands B-27

timeout	Number of seconds to wait before deciding a request to a Name Server has
	timed out. Minimum interval and default is 5 seconds, maximum interval is
	120 seconds.

set facility Sets the severity reporting level for a facility. The hosts that will receive the error <facility_name> log entries are defined using add syslog loglevel. Use list facilities to see what the

loglevel [level] current loglevel is for each facility. The levels:

CRITICAL - a serious system error, which may effect system integrity

UNUSUAL - an abnormal event, which the system should recover from

COMMON - a regularly occurring event that is not frequent

VERBOSE - a regular periodic event, e.g. a routing update message

￿DEBUG - for debugging purposes only

set ilmi vpi <number> This allows modification of the Virtual Path or Channel ID that will be used for

vci <number> exchanging ILMI (Integrated Local Management Interface) messages.

Parameter	Description
vpi	The virtual path identifier for the ILMI.
vci	The virtual channel identifier for the ILMI.

set interface <interface_name>

filter_access [ON OFF]

input_filter <filter_name>

￿output_filter <filter_name>

Sets filter parameters for the specified protocol on the specified interface. You can see the available filter files using list filters, view the contents of a filter file using show filter, and add filter files to FLASH memory using TFTP.

Parameter	Description
<interface_name>	Designation of interface you are setting parameters for. Limit of 32
	characters.
filter_access	ON causes filters specified for an interface with a set interface command,
	to override filters specified with a set user command, when the filters are
	of the same type.
input_filter	Name of filter file you wish to be applied to the input stream coming in on
	the specified interface. Limit: 20 characters.
output_filter	Name of the filter file you wish to be applied to the output stream leaving
	the specified interface. Limit: 20 characters.

set ip network <name> broadcast_algorithm [number] reassembly_maximum_size [number] rip_authentication [string] rip_policies_update <rip_policies>

￿routing_protocol [NONE RIPV1 RIPV2]