Product service
1Damage requiring
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change in performance; or
(e)The unit has been dropped or the cabinet damaged.
2
3Replacement
4Safety
The servicer will require all components to service your system. Therefore, should service ever be necessary, be sure to bring the entire system.
Product information
For product information or assistance with product operation:
In the U.S.A. and Puerto Rico, refer to “Customer Services Directory (United States and Puerto Rico)” on page 14.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at
Maintenance
Clean this unit with a soft, dry cloth. |
| |
≥Never use alcohol, paint thinner or benzine to clean this unit. |
| |
≥Before using chemically treated cloth, carefully read the instructions that | guide | |
came with the cloth. | ||
|
Troubleshooting guide | Troubleshooting/ | |||
Main unit |
| |||
Before requesting service, make the following checks. If you are in doubt |
|
| ||
about some of the check points, or if the solutions indicated in the table do |
|
| ||
not solve the problem, refer to “Customer Services Directory (United |
|
| ||
States and Puerto Rico)” on page 14 if you reside in the U.S.A. or Puerto |
|
| ||
Rico, or refer to “Product information” on the left if you reside in Canada. |
|
| ||
|
| Maintenance | ||
completed the pairing. | ≥Ensure the AC power supply cord is | |||
No power. |
|
| ||
| connected properly. |
|
| |
The indicator does not | ≥Turn the wireless system off and then |
|
| |
turn green even though | back on. |
|
| |
[I/D SET] is pressed and |
|
|
| |
|
|
| ||
On your home theater unit | / | |||
service | ||||
|
| |||
indicator | theater unit and the wireless system. Turn | |||
The wireless link | ≥There is no link between the home |
|
| |
(e.g. “ [W1] ” or an | the wireless system off and then back on. | Product | ||
indicator) is flashing. | Alternatively, turn the wireless system off, | |||
| disconnect the AC mains lead, and then |
|
| |
| reconnect it. |
|
| |
The wireless link | ≥Check that the home theater unit is turned |
|
| |
indicator | on, and the wireless system is turned on. | RQTX0170 | ||
(e.g. “ [W1] ” or an | ≥Ensure that the digital transmitter is fully | |||
indicator) does not | inserted into the slot of the home theater |
|
| |
light. | unit. |
|
| |
| ≥Ensure the surround sound setting on the |
|
| |
| home theater unit. |
| 11 | |
|
|
|
|