Table 1-5. LCD Status Messages
Code | Test | Causes | Corrective Actions |
E1414 CPU # Thermtrip
Specified microprocessor is out of acceptable temperature range and has halted operation.
See "Troubleshooting System Cooling" on page 138. If the problem persists, ensure that the processor heat sinks are properly installed. See "Troubleshooting Processors" on page 147.
NOTE: The LCD continues to display this message until the system’s power cord is disconnected and reconnected to the AC power source, or the SEL is cleared using either Server Assistant or the BMC Management Utility. See the Dell OpenManage Baseboard Management Controller User’s Guide for information about these utilities.
E1418 CPU # | Specified processor is | See "Troubleshooting |
Presence | missing or bad, and the | Processors" on page 147. |
system is in an |
| |
|
| |
| unsupported |
|
| configuration. |
|
E141C CPU Mismatch
Processors are in a | Ensure that your |
configuration unsupported | processors match and |
by Dell. | conform to the type |
| described in the |
| Microprocessor Technical |
| Specifications outlined in |
| your system’s Getting |
| Started Guide. |
About Your System
25
