•Virtual Media Configuration
•LAN User Configuration
•Reset To Default
•System Event Log Menu
NOTE: To remotely access the BMC through the integrated NIC, you must connect the network connection to integrated NIC1.
For additional information on using BMC, see the documentation for the BMC and systems management applications.
Entering the BMC Setup Module
1Turn on or restart your system.
2Press <Ctrl><e> when prompted after POST.
If your operating system begins to load before you press <Crtl><e>, allow the system to finish booting, and then restart your system and try again.
BMC Setup Module Options
For information about the BMC Setup Module options and how to configure the emergency management port (EMP), see the BMC User’s Guide.
Using the System Setup Program
55
