Table 1-5. LCD Status Messages
Code | Test | Causes | Corrective Actions |
E1620 PS # Input
Range
Power source for specified power supply is unavailable, or out of acceptable range.
Check the AC power source for the specified power supply. If problem persists, see "Troubleshooting Power Supplies" on page 137.
E1624 PS Redundancy
The power supply | See "Troubleshooting |
subsystem is no longer | Power Supplies" on |
redundant. If the last | page 137. |
supply fails, the system will |
|
go down. |
|
E1710 I/O Channel The system BIOS has | See "Getting Help" on | |
Chk | reported an I/O channel | page 165. |
check.
E1711 PCI PERR B## D## F##
PCI PERR
Slot #
PCI PERR
Slot #
The system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus ##, device ##, function ##.
The system BIOS has reported a PCI parity error on a component that resides in the specified PCI slot.
The system BIOS has reported a PCI parity error on a component that resides in the specified PCI slot.
Remove and reseat the PCI expansion cards. If the problem persists, see "Troubleshooting Expansion Cards" on page 145.
If the problem persists, the riser card or system board is faulty. See "Getting Help" on page 165.
Remove and reseat the PCI expansion cards. If the problem persists, see "Troubleshooting Expansion Cards" on page 145.
If the problem persists, the riser card or system board is faulty. See "Getting Help" on page 165.
About Your System
27
