Activating the NIC TOE
To add TCP/IP Offload Engine (TOE) functionality to the system, install the TOE NIC hardware key in the TOE_KEY socket on the system board. See "System Board Jumpers and Connectors" on page 153.
I/O Riser
Removing the I/O Riser
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.
1Open the system. See "Removing the Top Cover" on page 60.
2Rotate the retention latch at the back of the card slot into the up position.
3Push the card latch away from the card and lift on the card out of the system.
110
Installing System Components
