Converged Enhanced Ethernet Command Reference 45
53-1001762-01
show interface 3
DRAFT: BROCADE CONFIDENTIAL
show interface
Displays the configuration and status of an interface.
Synopsis show interface [tengigabitethernet slot/port | port-channel number| switchport]
Operands tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
port-channel number
Specifies the interface is a port-channel. The range of valid values is 1-63.
switchport Specifies the Layer 2 interface.
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to show the running system status and configuration for a specified interface.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display information for a 10 Gbps Ethernet interface:
switch#show interface tengigabitethernet 0/1
Interface name : TenGigabitEthernet 0/7
Switchport mode : access
Ingress filter : enable
Acceptable frame types : all
Default Vlan : 1
Active Vlans : 1
Inactive Vlans : -
Interface name : TenGigabitEthernet 0/1
Switchport mode : access
Ingress filter : enable
Acceptable frame types : all
Default Vlan : 5
Active Vlans : 5
Inactive Vlans : -
See Also show interface vlan