214 Converged Enhanced Ethernet Command Reference
53-1001762-01
show qos rcv-queue multicast
12
DRAFT: BROCADE CONFIDENTIAL
show qos rcv-queue multicastDisplays the runtime state retrieved from the dataplane reflecting any multicast packet expansion
packet drops resulting from a queue crossing the maximum queue depth.
Synopsis show qos rcv-queue multicast {tengigabitethernet slot/port | all}
Operands tengigabitethernet
Specifies the 10 Gbps Ethernet interface.
slot Specifies the 10 Gbps Ethernet interface linecard slot number.
port Specifies the 10 Gbps Ethernet interface port number within the linecard.
all Reports QoS multicast packet expansion receive queueing statistics for all
ASICs within the system.
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to display the runtime state information retrieved from the interface reflecting
any multicast packet expansion packet drops resulting from a queue crossing the maximum queue
depth.
Usage
Guidelines
For a stand-alone switch, all ASICs are considered as slot number zero (0).
Examples To display the queueing information:
switch#show qos rcv-queue multicast tengigabitethernet 0/2
Dropped Counts
Linecard/Portset TC 0 TC 1 TC 2 TC 3
-----------------------------------------------------------------------------
0/0 0 0 0 0
See Also show qos rcv-queue interface