100 Converged Enhanced Ethernet Command Reference
53-1001762-01
lacp timeout
6
DRAFT: BROCADE CONFIDENTIAL
lacp timeout Sets the timeout value used by LACP to exchange packets on an interface.
Synopsis lacp timeout [long | short]
no lacp timeout
Operands timeout Specifies the number of seconds before invalidating a received Link
Aggregation Control Protocol (LACP) data unit (DU).
long Specifies a long timeout value.
short Specifies a short timeout value.
Defaults By default, the short timeout value is 3 seconds for Brocade trunks. For standard trunks, the long
timeout value is 90 seconds.
Command
Modes
Interface configuration mode
Description Use this command to set the short timeout value for Brocade trunks or to set the long timeout
value for standard trunks. Use the no lacp timeout command to return to the default value.
Usage
Guidelines
If the LACP_timeout bit (encoded in Actor_State and Partner_State fields) is set to 1, the short
timeout takes effect; if set to 0 (zero), the long timeout takes effect.
Examples To set the LACP short timeout value to 5 seconds:
switch(conf-if-te-0/1)#lacp timeout short 5
See Also none