Converged Enhanced Ethernet Command Reference 207
53-1001762-01
show cee maps 12
DRAFT: BROCADE CONFIDENTIAL
show cee maps
Displays information on the defined CEE maps.
Synopsis show cee maps name
Operands name Restricts the output to report on only the named CEE map.
Defaults The default behavior without the optional operand is to report on all defined CEE maps.
Command
Modes
EXEC mode
Description Use this command to display information on a specified defined CEE map or on all of the defined
CEE maps. For each CEE map, the configuration state is displayed with a list of all of the Layer 2
interfaces bound to the CEE map.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To display information on all of the defined CEE maps:
switch#show cee maps
CEE Map test
Precedence 1
Priority Group Table
0: Weight 50, PFC Enabled, TrafficClass 4, BW% 50
1: Weight 50, PFC Disabled, TrafficClass 2, BW% 50
15.0: PFC Disabled, TrafficClass 6
15.1: PFC Disabled
15.2: PFC Disabled
15.3: PFC Disabled
15.4: PFC Disabled
15.5: PFC Disabled
15.6: PFC Disabled
15.7: PFC Disabled
Priority Table
CoS: 0 1 2 3 4 5 6 7
---------------------------------------------
PGID: 1 1 0 0 1 1 1 15.0
FCoE CoS: 3
Enabled on the following interfaces
te0/4
See Also cee, cee-map