88 Converged Enhanced Ethernet Command Reference
53-1001762-01
show lldp neighbors
5
DRAFT: BROCADE CONFIDENTIAL
show lldp neighbors Displays LLDP information for all neighboring devices on the specified interface.
Synopsis show lldp neighbors [interface tengigabitethernet slot/port detail]
Operands interface Use this keyword to specify the10 Gbps Ethernet interface using the following
operand followed by the slot or port number.
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
detail Displays all the LLDP neighbor information in detail for the specified
interface.
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
Description Use this command to display LLDP information for all neighboring devices on the specified
interface.
Usage
Guidelines
If you do not use the interface operand, only the mandatory TLVs are displayed.
Examples To display detailed LLDP neighbor information on a specific interface:
switch#show lldp neighbors interface tengigabitethernet 0/8 detail
Neighbors for Interface Te 0/8
MANDATORY TLVs
===============
Local Interface: Te 0/8 Remote Interface: Te 0/8 (IF Name)
Dead Interval: 120 secs Remaining Life : 100 secs Tx: 536 Rx: 535
Chassis ID: 0005.1e76.1020 (MAC)
Remote Mac: 0005.1e76.102c
OPTIONAL TLVs
==============
Port Interface Description: Te 0/8
System Name: sw0
System Description: Fibre Channel Switch.
System Capabilities: Switching Routing
System Capabilities Enabled: Switching
Link Prim: 257
Remote Protocols Advertised: Multiple Spanning Tree Protocol
Remote VLANs Configured: VLAN ID: 1 VLAN Name: default
AutoNego Support: Supported Not Enabled
AutoNego Capability: 0
Operational MAU Type: 0
Link Aggregation Capability: Capable