204 Converged Enhanced Ethernet Command Reference
53-1001762-01
qos rcv-queue multicast rate-limit
12
DRAFT: BROCADE CONFIDENTIAL
qos rcv-queue multicast rate-limit
Configures a cap on the maximum rate for multicast packet expansion.
Synopsis qos rcv-queue multicast rate-limit rate [burst burst-size]
no qos rcv-queue multicast rate-limit
Operands rate Specifies the maximum rate for multicast packet expansion in units of
packets per second (pkt/s). This places a cap on the sum of the first level
expansion, for example the ingress packets replicated for each egress switch
plus the second level expansion, for example packets replicated for egress
interfaces on the switch. The range of valid values is 5500-90000000 pkt/s.
burst burst-size Configures a cap on the maximum burst size for multicast packet expansion,
for example packet replication. The burst size represents the maximum
number of multicast packet expansion that can be performed back-to-back
as a single burst in units of packets (pkt). The range of valid values is
50-65535 pkt.
Defaults The default burst size is 4096 packets. The default rate value is 3000000pkt/s.
Command
Modes
Global configuration mode
Description Use this command to configures a cap on the maximum rate for multicast packet expansion, for
example packet replication. This rate limit is applied uniformly across the entire system. This rate
limit is enforced independently by each switch. Use the no qos rcv-queue multicast rate-limit
command to return the multicast packet expansion rate limit to the default settings.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To lower the maximum multicast packet expansion rate to 10000pkt/s:
switch(config)#qos rcv-queue multicast rate-limit 10000
To return the system to the default multicast packet expansion rate limit values:
switch(config)#no qos rcv-queue multicast rate-limit
See Also qos rcv-queue multicast