Converged Enhanced Ethernet Command Reference 219
53-1001762-01
dot1x port-control 13
DRAFT: BROCADE CONFIDENTIAL
dot1x port-control
Controls the authorization of a port state.
Synopsis dot1x port-control auto | force-authorized | force-unauthor ized
no dot1x port-control
Operands auto Enables authentication on port.
forced-authorized Forces a port to remain in an authorized state.
force-unauthorized
Forces a port to remain in an unauthorized state.
Defaults The default port state is auto.
Command
Modes
Interface configuration mode
Description Use this command to control the authorization of a port state. Use the no dot1x port-control
command to return to the default setting.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To enable the port state to auto:
switch(config)#interface tengigabitethernet 0/1
switch(conf-if-te-0/1)#dot1x port-control auto
See Also none