Converged Enhanced Ethernet Command Reference 179
53-1001762-01
show ip igmp groups 10
DRAFT: BROCADE CONFIDENTIAL
show ip igmp groups
Displays information related to learned groups in the IGMP protocol module.
Synopsis show ip igmp groups [A.B.C.D |detail [[interface tengigabitethernet slot/port |detail]|[interface
port-channel number |detail]| [interface vlan vlan_id |detail]]]
Operands A.B.C.D Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in the
multicast group.
detail Displays the IGMPv3 source information.
interface Use this keyword to specify any of the following interfaces:
tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
detail Displays the IGMPv3 source information.
interface Use this keyword to specify any of the following interfaces:
vlan vlan_id Specifies which VLAN interface to display the snooping configuration related
information. The range of valid values is 1-3583.
detail Displays the IGMPv3 source information.
interface Use this keyword to specify any of the following interfaces:
port-channel number
Specifies the interface is a port-channel. The range of valid values is 1-63.
detail Displays the IGMPv3 source information.
Defaults There are no defaults for this command.
Command
Modes
Privileged EXEC mode
Description Use this command to display the IGMP database, including configured entries for either all groups
on all interfaces, or all groups on specific interfaces, or specific groups on specific interfaces.
Usage
Guidelines
There are no usage guidelines for this command.
Examples none
See Also none