Converged Enhanced Ethernet Command Reference 183
53-1001762-01
DRAFT: BROCADE CONFIDENTIAL
Chapter
11
RMON Commands

rmon alarm

Sets alarm conditions.
Synopsis rmon alarm index snmp_oid interval seconds {absolute | delta} rising-threshold value event
number [falling-threshold valu e event number [owner name] | owner name]
no rmon alarm index [snmp_oid interval seconds {absolute | delta} rising-threshold value event
number [falling-threshold valu e event number [owner name] | owner name]]
Operands index Specifies the alarm index. The range of valid values is 1-65535.
snmp_oid Specifies the MIB object to monitor. The variable must be in the SNMP OID
format, for example, 1.3.6.1.2.1.16.1.1.1.5.65535. The object type must be a
counter32.
interval seconds Specifies the alarm sample interval in seconds. The range of valid values is
1-2147483648.
absolute Sets the sample type as absolute.
delta Sets the sample type as delta.
rising-threshold value
Specifies the alarm rising threshold. The range of valid values is
0-4294967295.
event number Specifies the event for the rising alarm. The range of valid values is 1-65535.
falling-threshold value
Specifies the alarm falling threshold. The range of valid values is
0-4294967295.
event number Specifies the event for the rising alarm. The range of valid values is 1-65535.
owner name Specifies the identity of the owner. The maximum number of characters is 32.
Defaults There are no alarms configured.
Command
Modes
Global configuration mode
Description Use this command to set alarm conditions. Use the no rmon alarm command to disable the alarm
conditions.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To set alarm conditions: