Converged Enhanced Ethernet Command Reference 129
53-1001762-01
error-disable-timeout enable 9
DRAFT: BROCADE CONFIDENTIAL
error-disable-timeout enable
Enables the timer to bring the interface out of the error-disabled state.
Synopsis error-disable-timeout enable
Operands none
Defaults There are no default configurations for this command.
Command
Modes
Protocol Spanning Tree mode
Description Use this command to enable the timer to bring the interface out of the disabled state.
Usage
Guidelines
When the Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) guard disables a port, the
port remains in the disabled state unless the port is enabled manually. This command allows you
to enable the interface from the disabled state.
Examples To bring the interface out of the disabled state:
switch(conf-rstp)#error-disable-timeout enable
See Also error-disable-timeout interval