84 Converged Enhanced Ethernet Command Reference
53-1001762-01
profile
5
DRAFT: BROCADE CONFIDENTIAL
profile
Creates an LLDP profile.
Synopsis profile name
no profile name
Operands name Assigns a name to the profile. The valid value is a maximum of 32 characters.
Defaults none
Command
Modes
Protocol LLDP configuration mode
Description Use this command to create an LLDP profile.
Usage
Guidelines
When you apply an LLDP profile on an interface using the lldp profile command, it overrides the
global configuration. If a profile is not present, then the default global profile is used until you
create a valid profile. Up to 64 profiles can be created.
Examples To create a profile named test:
switch(conf-lldp)#profile test
To delete a profile named test:
switch(conf-lldp)#no profile test
See Also lldp profile