Electrolux Professional S.p.A.
Ovens Platform Customer Support
Technical Training & Service
AOS_Q OVENS – Service manual
(593804600 - ENG)
1 Programming the default parameters
A | B | C | A | B | C | A | C |
|
|
|
|
|
|
| 1 |
| Fig. 1 |
|
| Fig. 2 |
|
| Fig. 3 |
Switch on the oven (fig. 1).
Just after the switching on, a lamp test will take place (fig 2).
At this point, during the lamp test phase, press the external service buttons A&C (fig.3) till you hear a beep.
B | C | A | B |
| B | 1 | 2 |
1 |
| 1 |
| 1 |
| ||
|
|
|
|
| |||
Fig. 4 |
|
| Fig. 5 |
| Fig. | 6 |
|
At this point press the right service buttons B&C till you hear a beep (fig. 4). Press then the left service buttons A&B till the beep (fig. 5).
At this point release the left button A keeping pressed the middle one B (fig. 6) till you hear 2 beeps.
Now release the middle button and, on the temperature display, you will see “PdEF”: the oven will switch off and on automatically.
File: AOS ONE service manual (ENG).01.doc ©Copyright 2007 by Electrolux Professional | P.4/31 |