Electrolux Professional S.p.A.
Ovens Platform Customer Support
Technical Training & Service
AOS_Q OVENS – Service manual
(593804600 - ENG)
2Advanced programming
A | B | C | A | B | C | A | C | 1 |
|
|
|
|
|
|
|
| |
| Fig. 7 |
|
| Fig. 8 |
|
| Fig. 9 |
|
The procedure to enter in advanced programming is similar to the procedure for programming the defaults parameters.
Switch on the oven (fig. 7).
Just after the switching on, a lamp test will take place (fig. 8).
At this point, during the lamp test, press the external service buttons A&C (fig.9) till you hear a beep.
B | C | A | B |
1 | 1 |
| 1 |
Fig. 10 |
|
| Fig. 11 |
At this point press the right buttons B&C till you hear a beep (fig. 10). Press then the left service buttons A&B till the beep (fig. 11).
Release the buttons and on the temperature display you will see “P 1” while on the little display the name of the parameter will appear (fig. 12).
With the external service buttons (A or C) it is possible to scroll the list of the parameters.
Pressing the middle button B it is possible to see the value of the parameter (fig. 13) and pressing at this point the external buttons (A or C) it is possible to modify the value. Press again the middle button B to return to the displaying of the number of the parameter and to store the new value.
Switch off the oven to exit from programming.
File: AOS ONE service manual (ENG).01.doc ©Copyright 2007 by Electrolux Professional | P.5/31 |
