Electrolux Professional S.p.A.
Ovens Platform Customer Support
Technical Training & Service
AOS_Q OVENS – Service manual
(593804600 - ENG)
| APPENDIX E – PARAMETER DESCRIPTIONS |
| |
|
|
|
|
Nome |
| Descrizione |
|
6Prb |
| Presence of |
|
AbLP |
| Flag to enable only the half power mode in the gas version (0=disable; 1= enable) | |
|
|
|
|
AbSP |
| Flag to enable starting of cooking closing the door (0=disable; 1=enable) |
|
AbtF |
| Flag to enable the |
|
Addr |
| RS485 address |
|
AL1E |
| Flag to enable detergent/rinser level probes (0=disable; 1=enable) when the relevant | |
| sensors are installed |
| |
|
|
| |
ALFn |
| Activation of cavity motor thermal protection |
|
APPL |
| Level of the oven |
|
APPM |
| Type of oven |
|
bAud |
| RS485 bit rate |
|
bot |
| Max. steam generator overheating (ETUB alarm) |
|
chr1 |
| First character of the password |
|
chr2 |
| Second character of the password |
|
chr3 |
| Third character of the password |
|
chr4 |
| Fourth character of the password |
|
chr5 |
| Fifth character of the password |
|
chr6 |
| Sixth character of the password |
|
chr7 |
| Seventh character of the password |
|
chr8 |
| Eighth character of the password |
|
CLt1 |
| Length of detergent injection (phase A) |
|
CLt2 |
| Length of detergent+water injection (phase A) |
|
CLt3 |
| Length of rinser+water injection (phase C) |
|
CLt4 |
| Length of water injection (phase C) |
|
cort |
| Flag to enable cavity temperature displaying adjustment |
|
cot |
| Max. cooking chamber overheating (ETUC alarm) |
|
dbon |
| Delay for boiler drain |
|
dCLn |
| Flag to disable automatic cleaning cycles (1=disable) |
|
dCLo |
| Flag to enable automatic cleaning cycles from “utility” button (0=enable; 1=disable) | |
dEMO |
| Flag to enable DEMO (0=disable; 1=enable) |
|
dSod |
| Flag to disable the oven stops when door is open in convection, steam and combi | |
| mode: (0=the oven stops) |
| |
|
|
| |
dSPS |
| Flag to disable | |
|
| ||
|
|
| |
dtSb |
| Delay for activation of fast filling during opening of boiler drain valve |
|
dutM |
| Maximum length of a phase with cavity temperature over 250 ºC |
|
E2PP |
| Flag to enable storing/erasing of recipes on EEPROM (0=enable; 1=disable) |
|
EcLn |
| Temperature for starting time computation of phase 1 during | |
EnFL |
| Presence of motorised cavity flap (1=yes) |
|
Ertc |
| Flag to enable the RTC real time clock (0=disable; 1= enable) |
|
FAHr |
| Temperature unit (°F = 1, °C = 0) |
|
FAn |
| Start speed of the motor (only for USA gas 2/1 models) 0=start at the selected speed; | |
| 1=start at full speed; 2= start at half speed |
| |
|
|
| |
FCLn |
| Minimum time to force a cleaning cycle (0=no cleaning cycle) |
|
Fubo |
| PWM value at full power of boiler burners |
|
FucA |
| PWM value at full power of cavity burners |
|
GAS |
| Define if the oven is GAS heated (1) or ELECTRIC heated (0) |
|
|
|
|
|
File: AOS ONE service manual (ENG).01.doc ©Copyright 2007 by Electrolux Professional | P.25/31 |