SMC Networks 2.4GHz/5GHz manual Bridge timeout, Bridge stp-bridge spanning-tree

Command Line Interface

bridge timeout

This command sets the aging time for both the Ethernet port and the wireless interface.

Syntax

bridge timeout <interface-id> <seconds>

•interface-id- An identifier that specifies the interface. (0 for Ethernet, 2 for 802.11a wireless)

•seconds - The time to age out an address entry. (Range: 60-1800 seconds)

Default

Ethernet: 100

802.11a wireless: 1800

Command Mode

Global Configuration

Command Usage

•If the MAC address of an entry in the address table is not seen on the associated interface for longer than the aging time, the entry is discarded.

Example

AP(config)#bridge timeout 0 300

AP(config)#bridge timeout 2 1000

AP(config)#

bridge stp-bridge spanning-tree

Use this command to enable the Spanning Tree Protocol globally for the wireless bridge. Use the no form to disable it.

Syntax

bridge stp-bridge spanning-tree no bridge stp-bridge spanning-tree

7-66