Connect External Antennas

Mounting Grooves

2.Position the bracket in the intended location and mark the position of the three mounting screw holes.

3.Drill three holes in the wall that match the screws and wall plugs included in the bracket kit, then secure the bracket to the wall.

4.Use the included nuts to tightly secure the wireless bridge to the bracket.

Connect External Antennas

When deploying a SMC2888W-M Master bridge unit for a bridge link or access point operation, you need to mount external antennas and connect them to the bridge. Typically, a bridge link requires a 5 GHz antenna, and access point operation a 2.4 GHz antenna. SMC2888W-S Slave units also require an external antenna for 2.4 GHz operation.

Perform these steps:

1.Mount the external antenna to the same supporting structure as the bridge, within 3 m (10 ft) distance, using the bracket supplied in the antenna package.

4-5

Page 57
Image 57
SMC Networks 2.4GHz/5GHz manual Connect External Antennas