![](/images/new-backgrounds/1108750/108750435x1.webp)
Command Line Interface
Example
AP(config)#
radius-server timeout
This command sets the interval between transmitting authentication requests to the RADIUS server.
Syntax
radius-server [secondary] timeout number_of_seconds
•secondary - Secondary server.
•number_of_seconds - Number of seconds the access point waits for a reply before resending a request. (Range:
Default Setting
5
Command Mode
Global Configuration
Example
AP(config)#
show radius
This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Exec