General Commands
–Network or host unreachable - The gateway found no corresponding entry in the route table.
•Press <Esc> to stop pinging.
Example
AP#ping 10.1.0.19 192.168.1.19 is alive AP#
reset
This command restarts the system or restores the factory default settings.
Syntax
reset <board configuration>
•board - Reboots the system.
•configuration - Resets the configuration settings to the factory defaults, and then reboots the system.
Default Setting
None
Command Mode
Exec
Command Usage
When the system is restarted, it will always run the
Example
This example shows how to reset the system:
AP#reset board
Reboot system now? <y/n>: y
