SMC Networks 2.4GHz/5GHz manual Address filter entry

Authentication

Example

AP(config)#address filter default denied

AP(config)#

Related Commands

address filter entry (page 7-57) show authentication (page 7-60)

address filter entry

This command enters a MAC address in the filter table.

Syntax

address filter entry <mac-address><allowed denied>

•mac-address- Physical address of client. (Enter six pairs of hexadecimal digits separated by hyphens; e.g., 00-90-D1-12-AB-89.)

•allowed - Entry is allowed access.

•denied - Entry is denied access.

Default

None

Command Mode

Global Configuration

Command Mode

•The access point supports up to 1024 MAC addresses.

•An entry in the address table may be allowed or denied access depending on the global setting configured for the address entry default command.

7-57