SMC Networks 2.4GHz/5GHz manual WDS Commands

WDS Commands

Example

AP#show authentication

Authentication Information

=========================================================

MAC Authentication Server	: REMOTE
MAC Auth Session Timeout Value : 1		secs
802.1x	: SUPPORTED
Broadcast Key Refresh Rate	: 5	min
Session Key Refresh Rate	: 5	min
802.1x Session Timeout Value	: 300 secs
Address Filtering	: DENIED

System Default : DENY addresses not found in filter table. Filter Table

MAC Address	Status
-----------------	----------
00-70-50-cc-99-1a	DENIED
00-70-50-cc-99-1b	ALLOWED

=========================================================

AP#

WDS Commands

The commands described in this section are used to configure the WIreless Distribution System (WDS) forwarding table.

Command	Function	Mode	Page
wds channel	Selects the radio band to be used for	GC	7-62
	bridge links
wds mac-address	Configures MAC addresses of	GC	7-62
	nodes in the wireless bridge network
wds enable	Enables WDS forwarding for specific	GC	7-63
	wireless port IDs
show wds	Displays the current entries in the	Exec	7-64
	WDS forwarding table

7-61