SMC Networks 2.4GHz/5GHz manual PPPoE Settings

Advanced Configuration

to display the current settings for the primary and secondary RADIUS servers.

AP(config)#radius-server address 192.168.1.25		7-45
AP(config)#radius-server port 181		7-46
AP(config)#radius-server key green		7-47
AP(config)#radius-server timeout 10		7-48
AP(config)#radius-server retransmit 5		7-47
AP(config)#exit
AP#show radius		7-48
Radius Server Information
========================================
IP	: 192.168.1.25
Port	: 181
Key	: *****
Retransmit	: 5
Timeout	: 10
========================================
Radius Secondary Server Information
========================================
IP	: 0.0.0.0
Port	: 1812
Key	: *****
Retransmit	: 3
Timeout	: 5

========================================

AP#

PPPoE Settings

The wireless bridge uses a Point-to-Point Protocol over Ethernet (PPPoE) connection, or tunnel, only for management traffic between the wireless bridge and a remote PPPoE server (typically at an ISP). Examples of management traffic that may initiated by the wireless bridge and carried over a PPPoE tunnel are RADIUS, Syslog, or DHCP traffic.

6-13