SMC Networks 2.4GHz/5GHz manual PPPoE Commands, Syntax Ip pppoe no ip pppoe Default Setting

PPPoE Commands

Command	Function	Mode	Page
pppoe lcp	Sets LCP echo timeout for the	IC-E	7-85
echo-failure	PPPoE tunnel
pppoe local ip	Sets local IP address for the PPPoE	IC-E	7-86
	tunnel
pppoe remote ip	Sets remote IP address for the	IC-E	7-86
	PPPoE tunnel
pppoe username	Sets the user name for the PPPoE	IC-E	7-87
	tunnel
pppoe password	Sets the password for the PPPoE	IC-E	7-88
	tunnel
pppoe	Sets the service name for the	IC-E	7-89
service-name	PPPoE tunnel
pppoe restart	Restarts the PPPoE connection with	IC-E	7-89
	updated parameters
show pppoe	Shows information about the	PE	7-90
	PPPoE configuration

ip pppoe

This command enables Point-to-Point Protocol over Ethernet (PPPoE) on the Ethernet interface. Use the no form to disable PPPoE on the Ethernet interface.

Syntax

ip pppoe no ip pppoe

Default Setting

Disabled

Command Mode

Interface Configuration (Ethernet)

7-81