SMC Networks 2.4GHz/5GHz manual BIT AES Encryption

Radio Interface

CLI Commands for AES Security – From the 802.11a interface configuration mode, use the encryption command to enable AES encryption. To enter AES keys, use the key command. To view the current security settings, use the show interface wireless a command.

AP(config)#interface wireless a			7-99
Enter Wireless configuration		commands, one per line.
AP(if-wireless a)#encryption		wdsaes alphanumeric	7-110
AP(if-wireless a)#key wdsaes 1 agoodsecretkey			7-112
AP(if-wireless a)#exit
AP#show interface wireless a			7-120
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description	: Enterprise 802.11a Wireless Outdoor
Bridge/AP
Service Type	: WDS Bridge
SSID	: DualBandOutdoor
Turbo Mode	: OFF
Channel	:	36
Status	: Disable
----------------802.11 Parameters--------------------------
Transmit Power	: FULL (15 dBm)
Max Station Data Rate	: 54Mbps
Fragmentation Threshold	:	2346 bytes
RTS Threshold	:	2347 bytes
Beacon Interval	:	100 TUs
DTIM Interval	:	2 beacons
Maximum Association	:	64 stations
----------------Security-----------------------------------
Encryption	:	128-BIT AES ENCRYPTION
AES Key type	:	Alphanumeric

===========================================================

AP#

Note: The key type value entered using the key command must be the same as the type specified in the encryption command.

6-71