Bridge Commands
show bridge
This command displays aging time and spanning tree settings for the Ethernet and wireless interfaces.
Syntax
show bridge
Command Mode
Exec
Example
AP#show bridge
Bridge Information
=================================================
Media Type Age Time(sec)
=================================================
EtherNet | 300 | ||
WLAN_A | 1000 |
==================================================
Bridge Id | : | 32768.037fbef192 | |
Root Bridge Id | : | 32768.01f47483e2 | |
Root Path Cost | : | 25 |
|
Root Port Id | : | 0 |
|
Bridge Status | : | Enabled | |
Bridge Priority | : | 32768 | |
Bridge Hello Time | : | 2 Seconds | |
Bridge Maximum Age | : | 20 | Seconds |
Bridge Forward Delay: | 15 | Seconds | |
============================= Port Summary |
| |||
============================= | Status | |||
Id Priority Path Cost | Fast Forward | |||
State | 128 | Enable | Enabled | |
0 | 25 | |||
Forwarding
AP#
