SMC Networks 2.4GHz/5GHz manual System Clock Commands

Command Line Interface

Example

AP#show logging

Logging Information

============================================

Syslog State	: Disabled
Logging Host State	: Enabled
Logging Console State	: Disabled
Server Domain name/IP	: none
Logging Level	: Error
Logging Facility Type	: 16

=============================================

AP#

System Clock Commands

These commands are used to configure SNTP and system clock settings on the wireless bridge.

Command	Function	Mode	Page
sntp-server ip	Specifies one or more time servers	GC	7-29
sntp-server	Accepts time from the specified time	GC	7-30
enable	servers
sntp-server	Manually sets the system date and	GC	7-31
date-time	time
sntp-server	Sets the start and end dates for	GC	7-31
daylight-saving	daylight savings time
sntp-server	Sets the time zone for the wireless	GC	7-32
timezone	bridge’s internal clock
show sntp	Shows current SNTP configuration	Exec	7-33
	settings

7-28