![](/images/new-backgrounds/1108750/108750211x1.webp)
System Configuration
you want to filter. To display the current settings, use the show filters command from the Exec mode.
AP(config)#filter | ||
AP(config)#filter | ||
AP(config)#filter | ||
AP(config)#exit |
|
|
AP#show filters |
| |
Protocol Filter Information |
| |
========================================================= |
| |
AP Management | :ENABLED |
|
Ethernet Type Filter :ENABLED |
| |
Enabled Protocol Filters |
| |
| ||
Protocol: ARP | ISO: 0x0806 |
|
=========================================================
AP#
SNMP
You can use a network management application to manage the wireless bridge via the Simple Network Management Protocol (SNMP) from a management station. To implement SNMP management, the wireless bridge must have an IP address and subnet mask, configured either manually or dynamically. Once an IP address has been configured, appropriate SNMP communities and trap receivers should be configured.
Community names are used to control management access to SNMP stations, as well as to authorize SNMP stations to receive trap messages from the wireless bridge. To communicate with the wireless bridge, a management station must first submit a valid community name for authentication. You therefore need to assign community names to specified users or user groups and set the access level.