SMC Networks 2.4GHz/5GHz manual System Logging Commands, Show version

System Logging Commands

show version

This command displays the software version for the system.

Default Setting

None

Command Mode

Exec

Example

AP#show version

Version v1.1.2.1B05

AP#

System Logging Commands

These commands are used to configure system logging on the wireless bridge.

Command	Function	Mode	Page
logging on	Controls logging of error messages	GC	7-24
logging host	Adds a syslog server host IP address	GC	7-24
	that will receive logging messages
logging console	Initiates logging of error messages to	GC	7-25
	the console
logging level	Defines the minimum severity level for	GC	7-25
	event logging
logging	Sets the facility type for remote	GC	7-26
facility-type	logging of syslog messages
show logging	Displays the state of logging	Exec	7-27

7-23