SMC Networks 2.4GHz/5GHz manual Bridge Commands

Bridge Commands

Bridge Commands

The commands described in this section are used to set the MAC address table aging time and spanning tree parameters for both the Ethernet and wireless interfaces.

Command	Function	Mode	Page
bridge timeout	Sets the aging time for the address	GC	7-66
	table
bridge stp-bridge	Enables the spanning tree protocol	GC	7-66
spanning-tree	for the bridge
bridge stp-bridge	Configures the spanning tree	GC	7-67
forward-time	bridge forward time
bridge stp-bridge	Configures the spanning tree	GC	7-68
hello-time	bridge hello time
bridge stp-bridge	Configures the spanning tree	GC	7-69
max-age	bridge maximum age
bridge stp-bridge	Configures the spanning tree	GC	7-70
priority	bridge priority
bridge stp-port	Configures the spanning tree path	GC	7-71
path-cost	cost of a port
bridge stp-port	Configures the spanning tree	GC	7-72
priority	priority of a port
bridge stp-port	Sets a port to fast forwarding	GC	7-73
portfast
bridge stp-port	Disables the spanning tree protocol	GC	7-74
spanning-disabled	on a port
show bridge	Displays the current aging time	Exec	7-75
	settings

7-65